Pages

Tuesday, April 9, 2013

How NOT to Make a Binding!

Easy Street is finally quilted and bound  

I really wanted to have this quilt finished for Bonnie Hunter's visit last week, but time ran out for me to even think about trying to do it myself.  So I asked my friend Ruth to quilt it for me.  
We chose this lovely feathery panto and Ruth used a gorgeous aqua thread... I just love it!!!!




I also chose to do the binding by machine - another time saver!  
Plus, the binding will be more secure and sturdy.  
Since this will be a guest room bed quilt, it will see lots of use and washings :*)


Sounds quick and simple, right?  
WRONG!

I had a really, really stupid moment while I was cutting the fabric for the outer border and binding.  The fabric was an older one in my stash and it worked perfectly with all the colors going on in the quilt - I especially love the little lime green specks in there!  But I had just enough - you know how that works, right?  I had a good chunk of yardage and then a nice-sized piece left over from an earlier project.  There was not an inch to spare - and no chance of finding anymore anywhere!

I carefully measured the quilt to figure out the number of strips I would need.  Nine was cutting it really, really close, especially with some of the strips from the leftover piece being shorter than WOF.
I calculated how wide I could make the border and still have enough left over for the binding strips.

And then I got stupid!
 I didn't recheck my measurements and I didn't write them down!!!  

You know the old saying....
Measure Twice, Cut Once?

Well, let me tell you, life is sure a lot easier if you listen to that saying!
And I'm adding in a for-the-future note just for me - WRITE IT DOWN!!!
=^..^=

I also didn't listen to my inner voice.  The one that said, "Cut your binding strips first, then measure what you have left and divide it by nine for your border strips."  Yeah, that voice.  I didn't listen.  And I went to work cutting my border strips first.  TOO WIDE!!!!  Instead of cutting them 4-1/2" inches like I was supposed to do, for some weird reason I cut them 6 inches!   Oh boy, was I in trouble!

It didn't take very long to realize that I wasn't going to have enough left for my nine binding strips at 2-1/4" wide each.  I had nothing else that would work for the binding, and I really wanted that beautiful border fabric to flow out all the way to the edge!

So this is what I did....

The remaining fabric was enough to cut nine strips at 1-1/4" wide.  Then I cut 1-1/2" off each of the border strips, leaving them the 4-1/2" they were supposed to be cut originally.  This left me with nine strips of each width, some of them a few inches shorter than others.  This is a huge quilt, and I was worried that with the strip joins and mitered corners, I might lose too much and run short.  I was holding my breath the whole way!


I then zig-zagged them together, with the edges butted up next to each other, like this....

I used a dark blue thread on the actual pieces - this is just to show how I did it :*D

I wasn't really sure if it was going to work.  After stitching the first two pieces, I tugged on them to see if they would be weak or separate - nope, it was a nice strong join!  Next, I trimmed the strips to a nice uniform 2-1/4" wide.

Since the strips were different widths, when I folded them in half the zig-zagged section was hidden in the fold.  And it laid nice and flat for me!





Don't you just love the satisfaction of a pile of binding all prepped and ready to sew down?


But was it going to be enough?  
That was the big question!!!

According to my measurements, I was going to have only inches to spare!


And voila!!!! 
This is what I had left over - 9 inches!!!


It was actually more left over than I thought there would be, so Happy Dance time!!!

So that is my story about my recent Adventures in Binding.  
It is a cautionary tale, and one I hope to take to heart in the future.

In the meantime, I will be enjoying my new quilt....



I wish you all...

Hugs & Blessings!
Teresa
=^..^=



27 comments:

  1. Well, that was a close call... glad you were able to save yourself and get your binding done. Thanks for sharing how you sewed the strips together. I'll store that away in my memory and hope I never have to use it! Your quilt is beautiful, great job!

    ReplyDelete
  2. Great save! I would never have thought to do that!

    ReplyDelete
  3. It turned out to be an absolutely stunning quilt! How ingenious on your part, and I will bet not one person will say a word about it! They will simply love using it!

    ReplyDelete
  4. brilliant...and i'm sure that bonnie is proud of you!!

    ReplyDelete
  5. Super save - sure you are not the only one to have done this in the cutting/measuring error. Just a beautiful quilt and love the panto choice as well as thread colour.

    ReplyDelete
  6. great quilt and great save on the binding! I would never have thought of that - now I learned something new today and I'm going to file it away for a 'just in case'. Thanks for sharing

    ReplyDelete
  7. Fabulous finish and it once again proves quilters are most ingenious at getting themselves into trouble and then out of it just as quickly. Great save!

    ReplyDelete
  8. What a great idea! It is hidden so well and worked out perfectly.

    ReplyDelete
  9. Wow, way to go girl! And now you'll get to enjoy your beautiful quilt, awesome!

    ReplyDelete
  10. I love your colors of Easy Street! And quilters are creative when it comes down to mking it work! Great job! It was a night mare but worthed!

    Do you know who I met today!? Guess! Bonnie Hunter! She was staying in my town and she came to visit my mother in law quilt shop! I blog about it later!

    Happy sewing!

    ReplyDelete
  11. Your Easy Street is stunning. Seeing yours a few weeks back motivated me to finish my quilt top. I'm still puzzled how I'm going to longarm it, but I love the allover design on yours.

    I saw on Fons & Porter Tips when you are running low on binding that you can cut the piece a little bit wider than what you need and then sew it to muslin. I'm not sure if you had wide enough pieces to do this or not, but 9" is plenty left over. LOL. Great finish!

    ReplyDelete
  12. My goodness, I would NEVER have thought of that solution. Genius, Teresa.
    What a wonderful finish. Beautiful colors and workmanship. Lovely choice of panto and thread. Great job, girlfriend!

    ReplyDelete
  13. Good job. Your quilt is fabulous!

    ReplyDelete
  14. It's all good in the end, I'm so glad for you to have it finished! L.O.V.E. your border and binding, I want to go with the blue green, also.

    A lady came to my quilt class to show her finish to a friend, and I was so tickled to see it was an Easy Street quilt! Her name was Missy, and she and I talked like friends sharing on the challenges, etc involved in this one. She paid to have hers quilted and bound, which made me not feel too bad about not being completed yet ~
    :-}pokey

    ReplyDelete
  15. Your quilt turned out so beautiful!
    And your story about the binding - wow! I am glad that you had enough in the end.
    Saskia

    ReplyDelete
  16. Lovely finish to the Easy Street. Mine is sitting on my dining room table to get marked and machine quilted still. I would love to get it finished before my parents get here to put on the guest bedroom bed.

    ReplyDelete
  17. Congrats on coming up with such a great, workable solution. And it's good to know that others run into the same Road Blocks that I do once in awhile! Thanks for sharing. :)

    ReplyDelete
  18. wow, it is a beauty! and lessons learned. life is good isn't it? : )

    ReplyDelete
  19. Stunning quilt Teresa! What a great binding story and save too. I've made mistakes like that too with cutting the wrong size. All's well that ends well.

    ReplyDelete
  20. What a brilliant save! I'm bookmarking this post for future reference.
    Your quilt is gorgeous!

    ReplyDelete
  21. Whew! Glad that worked out! That was such a clever solution - bravo!

    ReplyDelete
  22. oh dear, glad you were able to make it work! It looks fantastic! Gorgeous quilt :-)

    ReplyDelete
  23. I so know that feeling of dread - when your rotary cutter has slashed through and - oops wrong measurement!!! So glad it worked out and the quilt is absolutely gorgeous!!

    Blessings

    ReplyDelete
  24. Good save! I probably would have been so frustrated with myself that I wouldn't have thought of this genius idea. Easy Street looks fabulous!!!!

    ReplyDelete
  25. Oh my, that sounds like something I would do. Good job on coming up with a solution to get the quilt bound. It turned out absolutely beautiful!

    ReplyDelete
  26. You did good wiggling out of that scrape! :) Beautiful quilt!!

    ReplyDelete
  27. Holy cow! I don't know how I missed this post, but I now have 2462 emails in my inbox. Maybe that's how! lol
    I love your ES and the panto your friend used on it. Name of it?? What a slick trick on the binding. I have another one I use quite frequently--a reversible where the front of the binding matches the top border and the back of the binding matches the backing. You only need 1.5" of your front fabric for this plan. I love doing it too! Yours was a good save though. Where there's a will, there's a way, right? I'm still waiting to finish piecing my backing to my ES. Maybe next year.

    ReplyDelete